HP Dv5-1010us HP Pavilion dv5 Entertainment PC - Maintenance and Service Guide - Page 107
assembly and system board components, it may be necessary to move the fan/heat sink assembly
View all HP Dv5-1010us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Remove the fan/heat assembly: 1. Turn the system board upside down, with the expansion port 3 and external monitor port toward you. NOTE: Steps 2 through 4 apply only to computer models equipped with graphics subsystems with discrete memory. 2. Disconnect the fan cable (1) from the system board. 3. Loosen the three Phillips PM2.0×10.0 captive screws (2) that secure the fan/heat sink assembly to the system board. 4. Remove the fan/heat sink assembly (3). NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: Steps 5 through 7 apply only to computer models equipped with graphics subsystems with UMA memory. 5. Disconnect the fan cable (1) from the system board. 6. Loosen the three Phillips PM2.0×10.0 captive screws (2) that secure the fan/heat sink assembly to the system board. Component replacement procedures 99