HP Integrity Superdome 2 8/16 HP Integrity Superdome 2 Onboard Administrator U - Page 30
Insight Display errors, Power errors, Cooling errors
View all HP Integrity Superdome 2 8/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Insight Display errors The enclosure installation is successful when all errors are corrected. The errors in the following sections are specific to installation and initial configuration of the enclosure. The following types of errors might occur when installing and configuring the enclosure: • Power errors • Cooling errors • Location errors • Configuration errors • Device failure errors When the enclosure UID LED is off, the Insight Display is illuminated amber when any error condition exists. The navigation bar displays the following selections when an error condition exists: • Health summary icon- Displays the Health Summary screen • Fix This- Suggests corrective action to clear the current error • Next Alert- Displays the next alert, or if none exist, displays the Health Summary screen • Previous Alert- Displays the previous alert Power errors Power errors can occur because of insufficient power to bring up an enclosure. Power errors can occur on server blades, storage blades, or interconnect modules. To correct a power error: 1. Use the arrow buttons to navigate to Fix This, and then press OK. 2. Review and complete the corrective action suggested by the Insight Display. In most cases, you must either add power supplies to the enclosure or remove the indicated components. Cooling errors Cooling errors occur when too few fans are installed in the enclosure or when the existing fans are not installed in an effective configuration. Cooling errors can occur on server blades, storage blades, or interconnect modules. To correct a cooling error: 30 HP Integrity Superdome 2 Insight Display