HP J4819A User Manual - Page 37
Wall Mounting
View all HP J4819A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Caution Installing the Switch 5300xl Series Installation Procedures Wall Mounting The mounting brackets supplied with the switch allow you to mount it on a wall. The illustrations below show mounting a Switch 5308xl/5372xl. The Switch 5304xl/5348xl would be mounted in a similar way. For safe operation, do not install the switch with the vents or fans facing downward. The only recommended and supported wall mounting orientation is with the unit upright and the modules facing out, as shown in the illustrations below. Additionally, the switch should be mounted only to a wall or wood surface that is at least 1/2-inch plywood or its equivalent. 1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting brackets to the switch with the included 10-mm M4 screws. 10 mm M4 screws Figure 2-11. Attaching brackets to the rear of the switch 2. Attach the switch to the wall or wood surface with four 5/8-inch number 12 wood screws or larger (not included). Figure 2-12. Mounting to a wall 5/8-inch number 12 wood screws 2-17 Installing the Switch 5300xl Series