HP J4819A User Manual - Page 77
B. Switch Ports and Network Cables, Switch Ports, Twisted Pair, Fiber-Optic
View all HP J4819A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Switch Ports and Network Cables B Switch Ports and Network Cables Note This appendix includes switch connector information and network cable information for cables that should be used with the Switch 5300xl Series, including minimum pin-out information and specifications for twisted-pair cables. Incorrectly wired cabling is the most common cause of problems for LAN communications. It is recommended that you work with a qualified LAN cable installer for assistance with your cabling requirements. Switch Ports Twisted Pair ■ The RJ-45 ports on the 10/100-TX xl Module and the 100/1000-T xl Module accept 100-ohm differential unshielded and shielded twisted-pair cable with RJ-45 connectors as described on the next page. Fiber-Optic ■ The LC-type connector port on the Gigabit-SX mini-GBIC transmits at 850 nm wavelength, and accepts the low metal content, multimode fiberoptic cables for Gigabit-SX described on page B-3. ■ The LC-type connector port on the Gigabit-LX and LH mini-GBIC transmits at 1310 nm wavelength, and accepts the low metal content, single-mode or multimode fiber-optic cables for Gigabit-LX described on page B-3. B-1