HP LaserJet Enterprise MFP M633 User Guide - Page 150

Set up fax Introduction This information applies to fax and Flow models, or to other printers when an optional analog fax accessory has been installed. Before continuing, connect the printer to a phone line (for analog fax) or to an Internet or network fax service. Set up fax by using the printer control panel 1. From the Home screen on the printer control panel, swipe until the Settings menu displays. Touch the Settings icon to open the menu. 2. Open the following menus: ● Fax ● Internal Fax Modem Setup NOTE: If the Internal Fax Modem Setup menu does not appear in the menu listing, LAN or Internet fax might be enabled. When LAN or Internet fax is enabled, the analog fax accessory is disabled and the Internal Fax Modem Setup menu does not display. Only one fax feature, either LAN fax, analog fax, or Internet fax, can be enabled at a time. To use analog fax when LAN fax is enabled, use the HP Embedded Web Server to disable LAN fax. 3. Select the location from the list on the right side of the screen, and then touch Next. 4. Touch the Company Name text field, and use the keypad to type the company name. 5. Touch the Fax Number text field, and use the keypad to type the sending fax number. Touch Next. 6. Verify that the date and time settings are correct. Make changes as necessary, and then touch Next. 7. If a dialing prefix is required for sending faxes, touch the Dialing Prefix text field, and use the keypad to enter the number. 8. Review all the information on the left pane, and then touch Finish to complete the fax setup. 136 Chapter 7 Fax ENWW