HP Mini 210-1000 HP Mini 2102, HP Mini 210, and Compaq Mini 210 - Maintenance - Page 49

Hard drive, Disconnect the hard drive cable

Get HP Mini 210-1000 - PC PDF manuals and user guides View all HP Mini 210-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Hard drive NOTE: Each hard drive spare part kit includes a cable adapter, bracket, and four rubber isolators. Description Hard drive: 320-GB, 7200-RPM 250-GB, 7200-RPM 160-GB, 7200-RPM Hard Drive Hardware Kit Spare part number 590819-001 589670-001 589667-001 589673-001 Before removing a hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the service cover (see Battery on page 38). Remove the hard drive: 1. Disconnect the hard drive cable (1) from the system board. 2. Use the Mylar tab (2) on the right side of the hard drive to lift the right side of the drive (3) until it rests at an angle. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Hard drive
NOTE:
Each hard drive spare part kit includes a cable adapter, bracket, and four rubber isolators.
Description
Spare part number
Hard drive:
320-GB, 7200-RPM
590819-001
250-GB, 7200-RPM
589670-001
160-GB, 7200-RPM
589667-001
Hard Drive Hardware Kit
589673-001
Before removing a hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
38
).
5.
Remove the service cover (see
Battery
on page
38
).
Remove the hard drive:
1.
Disconnect the hard drive cable
(1)
from the system board.
2.
Use the Mylar tab
(2)
on the right side of the hard drive to lift the right side of the drive
(3)
until it
rests at an angle.
Component replacement procedures
41