HP Nc2400 HP Compaq nc2400 Notebook PC - Maintenance and Service Guide - Page 128
Remove the wireless antenna cables, from the system board.
UPC - 883585088331
View all HP Nc2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Removal and Replacement Procedures 7. Turn the computer display-side up with the front toward you. 8. Open the computer as far as it will open. 9. Remove the Torx8 T8M2.5×7.0 screw 1 that secures the display ground cable to the computer. 10. Disconnect the display cable 2 from the system board. 11. Remove the wireless antenna cables 3 from the Mini Card compartment and the top cover clips. Disconnecting the Display Cable and Removing the Wireless Antenna Cables 5-36 Maintenance and Service Guide
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
7. Turn the computer display-side up with the front toward you.
8. Open the computer as far as it will open.
9. Remove the Torx8 T8M2.5×7.0 screw
1
that secures the
display ground cable to the computer.
10. Disconnect the display cable
2
from the system board.
11. Remove the wireless antenna cables
3
from the Mini Card
compartment and the top cover clips.
Disconnecting the Display Cable and Removing the Wireless
Antenna Cables