HP Nc2400 HP Compaq nc2400 Notebook PC - Maintenance and Service Guide - Page 141
fingerprint reader board cable to the top cover., Remove the fingerprint reader board
UPC - 883585088331
View all HP Nc2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Removal and Replacement Procedures 3. Release the ZIF connector 1 to which the fingerprint reader board cable is connected and disconnect the fingerprint reader board cable 2. 4. Remove the two Phillips PM2.0×2.0 screws 3 that secure the fingerprint reader board cable to the top cover. 5. Remove the fingerprint reader board 4. Removing the Fingerprint Reader Board Reverse the above procedure to install the fingerprint reader board. Maintenance and Service Guide 5-49
Removal and Replacement Procedures
Maintenance and Service Guide
5–49
3. Release the ZIF connector
1
to which the fingerprint reader
board cable is connected and disconnect the fingerprint
reader board cable
2
.
4.
Remove the two Phillips PM2.0×2.0 screws
3
that secure the
fingerprint reader board cable to the top cover.
5. Remove the fingerprint reader board
4
.
Removing the Fingerprint Reader Board
Reverse the above procedure to install the fingerprint
reader board.