HP Neoware e140 TeemTalk® 5.0 for Unix User's Guide - Page 165

BQ 3107 Emulation 10 BQ 3107 Emulation This chapter describes the Bull BQ 3107 terminal emulation. Introduction To run the Bull BQ 3107 terminal emulation, display the Emulation Settings dialog box from the Settings menu and set the Alpha Emulation to BQ 3107, then click OK. The Status Bar The status bar displayed along the bottom of the window will show the status of various operations. Field 1: This will always display RUN, indiocating that the line shown corresponds to normal operation. Field 2: Indicates whether you are in Block or Character mode. In Block mode, keyboard entered data is displayed and processed locally, allowing you to edit it before a block of data is sent to the host. In Character mode, keyboard entered data is sent simultaneously to the host and the display. You can change the mode using the Operating Mode option in the BQ 3107 Settings dialog box. Field 3: This will display a bell symbol when the terminal emulation receives a BEL command from the host or when the user has pressed the wrong key. Field 4: Not used. Field 5: Displays ERR when an error is detected. Field 6: Displays BSY when the host is busy processing data. The keyboard will be locked when this is displayed. 10-1