HP Pavilion 11-ad000 Maintenance and Service Guide - Page 40

TouchPad, Remove the TouchPad

Get HP Pavilion 11-ad000 PDF manuals and user guides View all HP Pavilion 11-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

TouchPad Description Spare part number TouchPad (does not include TouchPad bracket or TouchPad cable) 924430-001 NOTE: The TouchPad bracket is available using spare part number 924420-001. The TouchPad cable is available using spare part numbers 924415-001 (for use only on computer models equipped with an Intel Pentium or Intel Celeron processor) and 924412-001 (for use only on computer models equipped with an Intel Core processor). Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 27). Remove the TouchPad: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Remove the five Phillips PM2.0×2.2 broad head screws (1) that secure the TouchPad bracket to the keyboard/top cover. 3. Lift the right side of the TouchPad bracket (2) until it rests at an angle. 4. Remove the TouchPad bracket (3) by sliding it up and to the right at an angle. 5. Remove the three Phillips PM2.0×2.2 broad head screws (1) that secure the TouchPad to the keyboard/ top cover. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
TouchPad
Description
Spare part number
TouchPad (does not include TouchPad bracket or TouchPad cable)
924430-001
NOTE:
The TouchPad bracket is available using spare part number 924420-001. The TouchPad cable is available using spare part
numbers 924415-001 (for use only on computer models equipped with an Intel Pentium or Intel Celeron processor) and 924412-001 (for
use only on computer models equipped with an Intel Core processor).
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
27
).
Remove the TouchPad:
1.
Turn the keyboard/top cover upside down with the front toward you.
2.
Remove the five Phillips PM2.0×2.2 broad head screws
(1)
that secure the TouchPad bracket to
the keyboard/top cover.
3.
Lift the right side of the TouchPad bracket
(2)
until it rests at an angle.
4.
Remove the TouchPad bracket
(3)
by sliding it up and to the right at an angle.
5.
Remove the three Phillips PM2.0×2.2 broad head screws
(1)
that secure the TouchPad to the keyboard/
top cover.
32
Chapter 5
Removal and replacement procedures