HP Pavilion 11-ad000 Maintenance and Service Guide - Page 45

Solid-state drive, Remove the Phillips PM2.0×3.0 screw

Get HP Pavilion 11-ad000 PDF manuals and user guides View all HP Pavilion 11-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Solid-state drive Description 128 GB, M.2 SATA, solid-state drive Spare part number 923683-001 Before removing the solid-state, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 27). 5. Remove the battery (see Battery on page 34). Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the system board. 2. Remove the drive (2) by pulling it away from the connector. NOTE: Solid-state drives are designed with notches to prevent incorrect insertion. Reverse this procedure to reassemble and install the solid-state drive. Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Solid-state drive
Description
Spare part number
128 GB, M.2 SATA, solid-state drive
923683-001
Before removing the solid-state, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
27
).
5.
Remove the battery (see
Battery
on page
34
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the drive to the system board.
2.
Remove the drive
(2)
by pulling it away from the connector.
NOTE:
Solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to reassemble and install the solid-state drive.
Component replacement procedures
37