HP Pavilion 11-ad000 Maintenance and Service Guide - Page 61

Display assembly, Remove the six Phillips PM2.5×5.7 screws

Get HP Pavilion 11-ad000 PDF manuals and user guides View all HP Pavilion 11-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Reverse this procedure to install the power connector cable. Display assembly NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 27), and then remove the following components: a. Battery (see Battery on page 34) b. Speakers (see Speakers on page 38) c. System board (see System board on page 42) Remove the display assembly: 1. Remove the six Phillips PM2.5×5.7 screws (1) that secure the display assembly to the base enclosure. 2. Remove the display assembly (2). 3. If it is necessary to replace the display panel assembly or any of the display assembly subcomponents: NOTE: The display panel assembly can be removed and replaced without removing the display assembly from the base enclosure. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Reverse this procedure to install the power connector cable.
Display assembly
NOTE:
The display assembly is spared at the subcomponent level. For display assembly spare part information,
see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
27
), and then remove
the following components:
a.
Battery (see
Battery
on page
34
)
b.
Speakers (see
Speakers
on page
38
)
c.
System board (see
System board
on page
42
)
Remove the display assembly:
1.
Remove the six Phillips PM2.5×5.7 screws
(1)
that secure the display assembly to the base enclosure.
2.
Remove the display assembly
(2)
.
3.
If it is necessary to replace the display panel assembly or any of the display assembly subcomponents:
NOTE:
The display panel assembly can be removed and replaced without removing the display assembly
from the base enclosure.
Component replacement procedures
53