HP Pavilion 11-ad000 Maintenance and Service Guide - Page 67
Release the shielding material, from the display back cover. The wireless antenna
View all HP Pavilion 11-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NOTE: It is necessary to remove the display assembly to remove and replace the display panel cable. a. Remove the display panel assembly. b. Remove the display panel cable from the retention channel built into the bottom edge of the display cover. The display panel cable is available using spare part numbers 928899-001 (for use only on computer models equipped with an Intel Pentium or Intel Celeron processor) and 924414-001 (for use only on computer models equipped with an Intel Core processor) and includes the G-sensor board cable. 9. If it is necessary to replace the wireless antenna cables and transceivers: a. Remove the display panel assembly. b. Detach the wireless antenna transceivers (1) from the display back cover. (The wireless antenna transceivers are attached to the display back cover with double-sided adhesive.) c. Release the shielding material (2) that secures the wireless antenna cables to the display back cover. d. Release the wireless antenna cables from the retention clips (3) and routing channel built into the top, left, and bottom edges of the display back cover. Component replacement procedures 59