HP Pavilion 11-ad000 Maintenance and Service Guide - Page 43
Hard drive
View all HP Pavilion 11-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive rubber sleeve or the hard drive gasket. The hard drive rubber sleeve is available using spare part number 924419-001.The hard drive gasket is available using spare part number 928898-001. Description 1 TB, 5400 rpm, SATA, with 8 GB hybrid solid-state hard drive 1 TB, 5400 rpm, SATA hard drive 500 GB, 5400 rpm, SATA, with 8 GB hybrid solid-state hard drive 500 GB, 5400 rpm, SATA hard drive Spare part number 924036-857 762888-857 731863-856 683839-857 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 27). 5. Remove the battery (see Battery on page 34). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Detach the hard drive cable (2) from the system board. (The hard drive cable is attached to the system board with double-sided adhesive.) Component replacement procedures 35