HP Pavilion 11-ad000 Maintenance and Service Guide - Page 63

TouchScreen equipped with an HD non-infrared camera., AntiGlare 1366 × 768, slim/flat 3.0 mm, UWVA

Page 63 highlights

e. Disconnect the TouchScreen board cable from the TouchScreen board. f. Release the adhesive strip (1) that secures the display panel cable connector to the display panel. g. Disconnect the display panel cable (2) from the display panel. h. Remove the display panel assembly (3). The display panel assembly is available using spare part number 925388-001 (11.6-in, HD, WLED, AntiGlare (1366 × 768), slim/flat (3.0 mm), UWVA, eDP, 220 nits, 16:9 ultra wide aspect ratio TouchScreen equipped with an HD non-infrared camera). 4. If it is necessary to replace the TouchScreen board: NOTE: The TouchScreen board can be removed and replaced without removing the display assembly from the base enclosure. a. Remove the display panel assembly. Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89

e.
Disconnect the TouchScreen board cable from the TouchScreen board.
f.
Release the adhesive strip
(1)
that secures the display panel cable connector to the display panel.
g.
Disconnect the display panel cable
(2)
from the display panel.
h.
Remove the display panel assembly
(3)
.
The display panel assembly is available using spare part number 925388-001 (11.6-in, HD, WLED,
AntiGlare (1366 × 768), slim/flat (3.0 mm), UWVA, eDP, 220 nits, 16:9 ultra wide aspect ratio
TouchScreen equipped with an HD non-infrared camera).
4.
If it is necessary to replace the TouchScreen board:
NOTE:
The TouchScreen board can be removed and replaced without removing the display assembly
from the base enclosure.
a.
Remove the display panel assembly.
Component replacement procedures
55