HP Pavilion 11 Maintenance and Service Guide - Page 43
to which the backlight cable is connected, and then, Release the zero insertion force ZIF connector
View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. Remove the seven Phillips M2.5×5.7 screws (2) that secure the bottom cover to the computer. 6. Turn the computer right side up with the front toward you. 7. Open the computer as far as it will open. 8. Insert a case utility tool (1) or similar plastic, flat-edged tool between the keyboard/top cover and the bottom cover near the display hinge area. 9. Release the rear edge (2) of the keyboard/top cover and swing it up and forward until it detaches from the bottom cover. 10. Lift the front edge (1) of the keyboard/top cover until the backlight cable and keyboard cable are accessible. 11. Release the zero insertion force (ZIF) connector (2) to which the backlight cable is connected, and then disconnect the backlight cable (3) from the system board. 12. Release the ZIF connector (4) to which the keyboard cable is connected, and then disconnect the keyboard cable (5) from the system board. Component replacement procedures 35