HP Pavilion 11 Maintenance and Service Guide - Page 63

Remove the Phillips PM2.0×4.6 screw, the speakers.

Get HP Pavilion 11 PDF manuals and user guides View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Speakers Description Speakers (includes cable) Spare part number 856108-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 39). 6. Remove the system board (see System board on page 46). Remove the speakers: 1. Remove the Phillips PM2.0×4.6 screw (1) that secures the speakers to the bottom cover. 2. Release the display panel cable and the wireless antenna cables from the routing clips (2) built into the speakers. 3. Release the speakers (3) by tilting the front edge up. 4. Remove the speakers (4) by sliding them forward. Reverse this procedure to install the speakers. Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Speakers
Description
Spare part number
Speakers (includes cable)
856108-001
Before removing the speakers, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
32
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
6.
Remove the system board (see
System board
on page
46
).
Remove the speakers:
1.
Remove the Phillips PM2.0×4.6 screw
(1)
that secures the speakers to the bottom cover.
2.
Release the display panel cable and the wireless antenna cables from the routing clips
(2)
built into
the speakers.
3.
Release the speakers
(3)
by tilting the front edge up.
4.
Remove the speakers
(4)
by sliding them forward.
Reverse this procedure to install the speakers.
Component replacement procedures
55