HP Pavilion 11 Maintenance and Service Guide - Page 48

Hard drive, to which the hard drive cable is connected, and then disconnect the hard

Get HP Pavilion 11 PDF manuals and user guides View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, cable, or screws. The hard drive bracket and screws are available using spare part number 856068-001. The hard drive cable is available using spare part numbers 909096-001 and 856066-001. Description 1-TB, 5400-rpm, SATA, 7.2-mm hard drive 500-GB, 5400-rpm, SATA, 7.2-mm hard drive 500-GB, 5400-rpm, SATA, 7.0-mm, 8.0-GB NAND hybrid solid-state hard drive Spare part number 762990-005 778186-005 732000-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 39). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Remove the four Phillips PM2.0×4.6 screws (2) that secure the hard drive to the bottom cover. 3. Use the hard drive tab (3) to remove the hard drive (4). 40 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, cable, or screws. The hard drive
bracket and screws are available using spare part number 856068-001. The hard drive cable is available using
spare part numbers 909096-001 and 856066-001.
Description
Spare part number
1-TB, 5400-rpm, SATA, 7.2-mm hard drive
762990-005
500-GB, 5400-rpm, SATA, 7.2-mm hard drive
778186-005
500-GB, 5400-rpm, SATA, 7.0-mm, 8.0-GB NAND hybrid solid-state hard drive
732000-005
Before removing the hard drive, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
32
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
Remove the hard drive:
1.
Release the ZIF connector
(1)
to which the hard drive cable is connected, and then disconnect the hard
drive cable from the system board.
2.
Remove the four Phillips PM2.0×4.6 screws
(2)
that secure the hard drive to the bottom cover.
3.
Use the hard drive tab
(3)
to remove the hard drive
(4)
.
40
Chapter 5
Removal and replacement procedures