HP Pavilion 11 Maintenance and Service Guide - Page 72

Power connector cable, Remove the power connector cable

Get HP Pavilion 11 PDF manuals and user guides View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Power connector cable Description Power connector cable Spare part number 855995-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 39). 6. Remove the system board (see System board on page 46). Remove the power connector cable: 1. Detach the clips (1) on the power connector cable bracket from the tabs built into the bottom cover. 2. Remove the power connector cable bracket (2). 3. Remove the power connector cable (3) by sliding it forward, and then lifting it up. Reverse this procedure to install the power connector cable. 64 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Power connector cable
Description
Spare part number
Power connector cable
855995-001
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
32
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
6.
Remove the system board (see
System board
on page
46
).
Remove the power connector cable:
1.
Detach the clips
(1)
on the power connector cable bracket from the tabs built into the bottom cover.
2.
Remove the power connector cable bracket
(2)
.
3.
Remove the power connector cable
(3)
by sliding it forward, and then lifting it up.
Reverse this procedure to install the power connector cable.
64
Chapter 5
Removal and replacement procedures