HP Pavilion 11 Maintenance and Service Guide - Page 61
Fan/heat sink assembly, Remove the fan/heat sink assembly
View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Fan/heat sink assembly NOTE: The fan/heat sink assembly spare part kit includes replacement thermal material. Description For use only on computer models equipped with an Intel Core processor For use only on computer models equipped with an Intel Pentium N4200 or Intel Celeron N3350 processor For use only on computer models equipped with an Intel Pentium M3710 or Intel Celeron N3060 processor For use only on computer models equipped with an Intel Celeron N3060 processor and eMMC Spare part number 855996-001 903214-001 855997-001 855998-001 Before removing the fan/heat sink assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 39). 6. Remove the system board (see System board on page 46). Remove the fan/heat sink assembly: 1. Turn the system board upside down with the front toward you. 2. Disconnect the fan cable (1) from the system board. 3. Loosen the four Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to the system board. Component replacement procedures 53