HP Pavilion 11 Maintenance and Service Guide - Page 64

Display assembly

Get HP Pavilion 11 PDF manuals and user guides View all HP Pavilion 11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 39). 6. Remove the system board (see System board on page 46). Remove the display assembly: 1. Tilt the display forward to an upright position. 2. Remove the four Phillips PM2.5×4.2 screws that secure the display assembly to the bottom cover. 3. Tilt the top edge of the display (1) back to release the display hinges from the alignment pins upon which they rest. 4. Slide the bottom edge of the display assembly forward (2) until it releases from the bottom cover. 56 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For display assembly spare part
information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
32
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
6.
Remove the system board (see
System board
on page
46
).
Remove the display assembly:
1.
Tilt the display forward to an upright position.
2.
Remove the four Phillips PM2.5×4.2 screws that secure the display assembly to the bottom cover.
3.
Tilt the top edge of the display
(1)
back to release the display hinges from the alignment pins upon
which they rest.
4.
Slide the bottom edge of the display assembly forward
(2)
until it releases from the bottom cover.
56
Chapter 5
Removal and replacement procedures