HP Pavilion TouchSmart 14-n028ca HP Pavilion 14 Notebook PC HP Pavilion TouchS - Page 79
Optical drive connector cable, WLAN module see
View all HP Pavilion TouchSmart 14-n028ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6. Remove the TouchPad button board (5). Reverse this procedure to install the TouchPad button board. Optical drive connector cable NOTE: The optical drive connector cable is included with the Optical Drive, spare part number 734415-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: a. Optical drive (see Optical drive on page 48) b. Service door (see Service door on page 43) c. WLAN module (see WLAN module on page 46) d. Memory module (see Memory module on page 44) e. Keyboard (see Keyboard on page 54) f. Top cover (see Top cover on page 59) Component replacement procedures 69