HP Pavilion TouchSmart 14-n028ca HP Pavilion 14 Notebook PC HP Pavilion TouchS - Page 94

sink assembly is removed. Replacement thermal material is included with the heat sink

Get HP Pavilion TouchSmart 14-n028ca PDF manuals and user guides View all HP Pavilion TouchSmart 14-n028ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Reverse this procedure to install the heat sink assembly on computer models equipped with switchable discrete graphics. 5. Following the 1, 2, 3, 4 sequence stamped into the heat sink assembly, loosen the 4 Phillips PM2.0×10.0 captive screws (1) that secure the heat sink assembly to the system board. 6. Remove the heat sink assembly (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink assembly and system board components, it may be necessary to move the heat sink assembly from side to side to detach it. 7. Remove the thermal material. The thermal material must be thoroughly cleaned from the surfaces of the heat sink assembly and the system board components each time the heat sink assembly is removed. Replacement thermal material is included with the heat sink assembly and system board spare part kits. Thermal paste is used on the processor (1) and the heat sink assembly section (2) that services it. 84 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
Reverse this procedure to install the heat sink assembly on computer models equipped with
switchable discrete graphics.
5.
Following the 1, 2, 3, 4 sequence stamped into the heat sink assembly, loosen the 4 Phillips
PM2.0×10.0 captive screws
(1)
that secure the heat sink assembly to the system board.
6.
Remove the heat sink assembly
(2)
.
NOTE:
Due to the adhesive quality of the thermal material located between the heat sink
assembly and system board components, it may be necessary to move the heat sink assembly
from side to side to detach it.
7.
Remove the thermal material. The thermal material must be thoroughly cleaned from
the surfaces of the heat sink assembly and the system board components each time the heat
sink assembly is removed. Replacement thermal material is included with the heat sink
assembly and system board spare part kits. Thermal paste is used on the processor
(1)
and the heat sink assembly section
(2)
that services it.
84
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts