HP Pavilion TouchSmart 14-n028ca HP Pavilion 14 Notebook PC HP Pavilion TouchS - Page 96

Power connector cable, System board see

Page 96 highlights

Power connector cable Description Power connector cable (includes bracket) Spare part number 732067-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: a. Optical drive (see Optical drive on page 48) b. WLAN module (see WLAN module on page 46) c. Memory module (see Memory module on page 44) d. Keyboard (see Keyboard on page 54) e. Top cover (see Top cover on page 59) f. Hard drive (see Hard drive on page 63) g. System board (see System board on page 71) Remove the power connector board: NOTE: The power connector bracket was removed when removing the system board. 1. Turn the system board upside down, with the front toward you. 2. Release the power connector from the clip built into the system board. Reverse this procedure to install the power connector cable. 86 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130

Power connector cable
Description
Spare part number
Power connector cable (includes bracket)
732067-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
42
), and then remove the following components:
a.
Optical drive (see
Optical drive
on page
48
)
b.
WLAN module (see
WLAN module
on page
46
)
c.
Memory module (see
Memory module
on page
44
)
d.
Keyboard (see
Keyboard
on page
54
)
e.
Top cover (see
Top cover
on page
59
)
f.
Hard drive (see
Hard drive
on page
63
)
g.
System board (see
System board
on page
71
)
Remove the power connector board:
NOTE:
The power connector bracket was removed when removing the system board.
1.
Turn the system board upside down, with the front toward you.
2.
Release the power connector from the clip built into the system board.
Reverse this procedure to install the power connector cable.
86
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts