HP Pavilion dv7-4000 HP Pavilion dv7 Entertainment PC - Maintenance and Servic - Page 87

USB board, Remove the following components

Get HP Pavilion dv7-4000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv7-4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

3. Lift up on the right side of the system board until it is at approximately a 45-degree angle (2), and then lift the system board to the right and up and out of the base enclosure (3). Reverse this procedure to install the system board. USB board Description USB board (includes cable) Spare part number 605348-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the primary hard drive cover (see Primary hard drive cover on page 47). 6. Remove the following components: a. Hard drive (see Hard drive on page 48). b. Secondary hard drive (see Secondary hard drive on page 50). c. Optical drive (see Optical drive on page 57). d. Keyboard (see Keyboard on page 58). Component replacement procedures 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
3.
Lift up on the right side of the system board until it is at approximately a 45-degree angle
(2)
, and
then lift the system board to the right and up and out of the base enclosure
(3)
.
Reverse this procedure to install the system board.
USB board
Description
Spare part number
USB board (includes cable)
605348-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery
on page
46
).
5.
Remove the primary hard drive cover (see
Primary hard drive cover
on page
47
).
6.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
48
).
b.
Secondary hard drive (see
Secondary hard drive
on page
50
).
c.
Optical drive (see
Optical drive
on page
57
).
d.
Keyboard (see
Keyboard
on page
58
).
Component replacement procedures
79