HP ProLiant 1600 Migrating from SCO OpenServer 5.0.5 to UnixWare 7.1 Using Com - Page 16
Step 3: Insert your SmartStart and Support Software CD. - smartstart cd download
View all HP ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23 16 Step 3: Insert your SmartStart and Support Software CD. Step 4: Insert your Compaq Server Profile diskette. This is a new feature of SmartStart and ships with your SmartStart CD v4.23. Step 5: Update firmware (ROMPaqs). You can easily update the onboard firmware (operating program in ROM) in your Compaq server and for most Compaq options. This is done by flashing the ROM, using the special Compaq utilities--System ROMPaq and Option ROMPaq-- listed in Table 7. These utilities replace the existing contents of the ROM with an updated version stored on the Compaq SmartStart and Support Software CD. To obtain even more recent System and Option utilities, you might have to download the SoftPaqs from the Compaq website www.compaq.com/support/files/server/Rompaq/index.html and follow the instructions that accompany the SoftPaqs. Step 6: Run the Compaq Erase Utility. Step 7: Cycle power. Step 8: Select UnixWare 7.1 as your OS. SmartStart will prompt you to select a language, to set the date and time, to agree to the licensing agreement, and to choose a SmartStart path: Manual or Assisted Integration. (This Integration Note describes the Assisted Installation procedure). Step 9: Configure your system and create System Partition. With SmartStart, the Compaq System Configuration Utility starts automatically. You should review your current system configuration (see Appendix B) at this time to ensure that no hardware configuration conflicts exist. SmartStart will also automatically create your System Partition. Of prime importance, you should check if the SCO OpenServer 5.0.5 controller order, Host Bus Adapter (HBA) number, device interrupts, and SCSI IDs match the ones needed for UnixWare 7.1. System Configuration Procedures • Select Review and Modify Your System. • Select Hardware. • Select View and Edit Details. • Change the current configuration information to match the configuration from your OpenServer 5.0.5 system: (1) controller order, (2) Host Bus Adapter numbers, (3) device interrupts, and (4) SCSI IDs. See Appendix B. • Save your configuration and restart your server. 0413-0799-A