HP ProLiant 1600 Migrating from SCO OpenServer 5.0.5 to UnixWare 7.1 Using Com - Page 22
Step 22: Con your modem., Step 24: Con your Point-To-Point Protocol (PPP).
View all HP ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23 22 Step 22: Configure your modem. • Enter scoadmin. • Select Modem Manager. • Select Manual Configuration. • Fill in information from backup. • Select Configure Port. • Insert port configuration information. • Exit. Step 23: Configure your TCP/IP. • Enter scoadmin. • Enter Network Configuration Manager. • Select Protocols. • Select View Protocol Configuration. • Select TCP/IP as the protocol to be configured. • Add information from backup. • Select Advanced Options. • Add gateway and frame format information from backup • Exit. Step 24: Configure your Point-To-Point Protocol (PPP). • Enter scoadmin. • Select WAN. • Select Network. • Select Network Configuration Manager. • Select Configure PPP. • Select Bundle. • Select Configuring Outgoing PPP. • Enter Bundle name. • Select Outgoing as the Bundle Type. • Enter the remote system name and method of initiating the link. • Select Edit to add a remote system. • Select Add. • Enter remote system name, device type, line speed and phone number. 0413-0799-A