HP ProLiant SL390s HP ProLiant SL390s G7 2U half width Server Maintenance and - Page 80

Table 9, Components, Description

Get HP ProLiant SL390s - G7 Server PDF manuals and user guides View all HP ProLiant SL390s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Table 9 Hardware Specifications Item Power Supply unit (PSU) Thermal solution Components 1200W Redundant, power supply 750W Redundant, power supply Eight 80mm system fans Table 10 Physical Dimensions Item System board platform System board dimension Dimensions (H x W x D) (with bezel) Server weight (approximate) Description ATX (Advanced Technology Extended) 17.935''x6.5'' 6.96 x 17.64 x 35.32 inch Full loading (all memory, hard drives, power supplies, and processors installed) 70.2kg Light loading (one piece of memory, one hard drive, and one processor 8 trays installed) 58.4kg Table 11 Environmental Specifications Item Description Thermal output (maximum operating) 392 W/hr System inlet temperature Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a maximum of 10,000 ft (3050 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 86°F (30°C). System inlet temperature Non-operating 40° to 140° F (-40° to 60° C) Maximum rate of change is 36°F/hr (20°C/hr). Relative humidity (non-condensing) Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb temperature, non-condensing. Relative humidity (non-condensing) Non-operating 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, non-condensing. Altitude Operating 10,000 ft (3050 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Altitude Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Physical and Operating Specifications 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Physical and Operating Specifications 80
Table 9
Hardware Specifications
Item
Components
Power Supply unit (PSU)
1200W Redundant, power supply
750W Redundant, power supply
Thermal solution
Eight 80mm system fans
Table 10
Physical Dimensions
Item
Description
System board platform
ATX (Advanced Technology Extended)
System board dimension
17.935’’x6.5’’
Dimensions (H x W x D)
(with bezel)
6.96 x 17.64 x 35.32 inch
Server weight (approximate)
Full loading (all memory, hard drives, power supplies, and processors
installed) 70.2kg
Light loading (one piece of memory, one hard drive, and one processor
8 trays installed) 58.4kg
Table 11
Environmental Specifications
Item
Description
Thermal output (maximum operating)
392 W/hr
System inlet temperature
Operating
50° to 95° F (10° to 35° C) at sea level with an altitude derating of
1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct sustained sunlight.
Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or
above 86°F (30°C).
System inlet temperature
Non-operating
40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative humidity (non-condensing)
Operating
10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb
temperature, non-condensing.
Relative humidity (non-condensing)
Non-operating
10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet
bulb temperature, non-condensing.
Altitude
Operating
10,000 ft (3050 m). This value may be limited by the type and number
of options installed. Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Altitude
Non-operating
30,000 ft (9144 m). Maximum allowable altitude change rate is 1500
ft/min (457 m/min).