HP ProLiant xw2x220c HP ProLiant xw2x220c Workstation Blade Maintenance and Se - Page 30

When installing the heatsink, align the guide pins on the processor retention

Get HP ProLiant xw2x220c - Blade Workstation PDF manuals and user guides View all HP ProLiant xw2x220c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

7. Apply all the grease to the top of the processor in one of the following patterns to ensure even distribution: CAUTION: To prevent possible workstation malfunction, route the BBWC battery cable so that it does not become pinched or damaged when the heatsink is installed. 8. If removed, install the BBWC cable. CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern). IMPORTANT: When installing the heatsink, align the guide pins on the processor retention bracket with the alignment holes in the heatsink. 9. Install the heatsink. 10. Install all components removed from the failed system board. Removal and replacement procedures 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Removal and replacement procedures
30
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION:
To prevent possible workstation malfunction, route the BBWC battery cable so that
it does not become pinched or damaged when the heatsink is installed.
8.
If removed, install the BBWC cable.
CAUTION:
Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
9.
Install the heatsink.
10.
Install all components removed from the failed system board.