HP ProLiant xw2x220c HP ProLiant xw2x220c Workstation Blade Maintenance and Se - Page 37

Record the workstation serial number and product ID. For the location of the serial number label,

Get HP ProLiant xw2x220c - Blade Workstation PDF manuals and user guides View all HP ProLiant xw2x220c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

8. Apply all the grease to the top of the processor in one of the following patterns to ensure even distribution: CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern). IMPORTANT: When installing the heatsink, align the guide pins on the processor retention bracket with the alignment holes in the heatsink. 9. Install the heatsink. 10. Install all components removed from the failed system board. 11. Record the workstation serial number and product ID. For the location of the serial number label, see "Workstation B system board components (on page 49)." 12. Install the workstation B assembly ("Install workstation B assembly" on page 13). 13. Install the workstation blade. Removal and replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Removal and replacement procedures
37
8.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION:
Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
9.
Install the heatsink.
10.
Install all components removed from the failed system board.
11.
Record the workstation serial number and product ID. For the location of the serial number label, see
"Workstation B system board components (on page
49
)."
12.
Install the workstation B assembly ("
Install workstation B assembly
" on page
13
).
13.
Install the workstation blade.