HP Rp3000 Troubleshooting Guide - Page 53

Numeric Codes and Text Messages continued, Table A-1

Get HP Rp3000 - Point of Sale System PDF manuals and user guides
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Table A-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action 303-Keyboard Controller Error I/O board keyboard controller. 1. Reconnect keyboard with computer turned off. 2. Replace the system board. 304-Keyboard or System Unit Error Keyboard failure. 1. Reconnect the keyboard with computer turned off. 2. Ensure that none of the keys are depressed. 3. Replace the keyboard. 4. Replace the system board. 404-Parallel Port Address Conflict Detected Both external and internal ports are assigned 1. Remove any parallel port expansion to parallel port X. cards. 2. Clear CMOS. (See Appendix B, Password Security and Resetting CMOS on page 53.) 3. Reconfigure card resources and/or run Computer Setup. 410-Audio Interrupt Conflict IRQ address conflicts with another device. Enter Computer Setup and reset the IRQ in Advanced > Onboard Devices. 411-Network Interface Card Interrupt Conflict IRQ address conflicts with another device. Enter Computer Setup and reset the IRQ in Advanced > Onboard Devices. 501-Display Adapter Failure Graphics display controller. 1. Reseat the graphics card (if applicable). 2. Clear CMOS. (See Appendix B, Password Security and Resetting CMOS on page 53.) 3. Verify monitor is attached and turned on. 4. Replace the graphics card (if possible). 510-Flash Screen Image Corrupted Flash Screen image has errors. Reflash the system ROM with the latest BIOS image. 512-Chassis Fan not Detected Chassis fan is not connected or may have malfunctioned. 1. Reseat chassis fan. 2. Reseat fan cable. 3. Replace chassis fan. 514-Chassis Fan not Detected Chassis fan is not connected or may have malfunctioned. 1. Reseat chassis fan. 2. Reseat fan cable. 3. Replace chassis fan. 610-External Storage Device Failure External tape drive not connected. Reinstall tape drive or press F1 and allow system to reconfigure without the drive. 660-Display cache is detected unreliable Integrated graphics controller display cache Replace system board if minimal graphics is not working properly and will be disabled. degrading is an issue. ENWW POST Numeric Codes and Text Messages 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Control panel message
Description
Recommended action
303-Keyboard Controller Error
I/O board keyboard controller.
1.
Reconnect keyboard with computer
turned off.
2.
Replace the system board.
304-Keyboard or System Unit Error
Keyboard failure.
1.
Reconnect the keyboard with computer
turned off.
2.
Ensure that none of the keys are
depressed.
3.
Replace the keyboard.
4.
Replace the system board.
404-Parallel Port Address Conflict Detected
Both external and internal ports are assigned
to parallel port X.
1.
Remove any parallel port expansion
cards.
2.
Clear CMOS. (See Appendix B,
Password Security and Resetting
CMOS
on page
53
.)
3.
Reconfigure card resources and/or run
Computer Setup.
410-Audio Interrupt Conflict
IRQ address conflicts with another device.
Enter Computer Setup and reset the IRQ in
Advanced
>
Onboard Devices
.
411-Network Interface Card Interrupt Conflict
IRQ address conflicts with another device.
Enter Computer Setup and reset the IRQ in
Advanced
>
Onboard Devices
.
501-Display Adapter Failure
Graphics display controller.
1.
Reseat the graphics card (if applicable).
2.
Clear CMOS. (See Appendix B,
Password Security and Resetting
CMOS
on page
53
.)
3.
Verify monitor is attached and turned
on.
4.
Replace the graphics card (if possible).
510-Flash Screen Image Corrupted
Flash Screen image has errors.
Reflash the system ROM with the latest BIOS
image.
512-Chassis Fan not Detected
Chassis fan is not connected or may have
malfunctioned.
1.
Reseat chassis fan.
2.
Reseat fan cable.
3.
Replace chassis fan.
514-Chassis Fan not Detected
Chassis fan is not connected or may have
malfunctioned.
1.
Reseat chassis fan.
2.
Reseat fan cable.
3.
Replace chassis fan.
610-External Storage Device Failure
External tape drive not connected.
Reinstall tape drive or press
F1
and allow
system to reconfigure without the drive.
660-Display cache is detected unreliable
Integrated graphics controller display cache
is not working properly and will be disabled.
Replace system board if minimal graphics
degrading is an issue.
Table A-1
Numeric Codes and Text Messages (continued)
ENWW
POST Numeric Codes and Text Messages
47