HP Rp3000 Troubleshooting Guide - Page 62
Illustrated Parts & Service Map, Computer Setup F10 Utility Guide
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
NOTE: For assistance locating the CMOS jumper and other system board components, see the Illustrated Parts & Service Map (IPSM) for that particular system. 5. Remove the CMOS jumper from pins 1 and 2 and put the jumper on pins 2 and 3. This clears CMOS. 6. Put the jumper back on pins 1 and 2. 7. Replace the computer cover or access panel. 8. Reconnect the external devices. 9. Plug in the computer and turn on power. NOTE: You will receive POST error messages after clearing CMOS and rebooting advising you that configuration changes have occurred. Use Computer Setup to reset any special system setups along with the date and time. For instructions on Computer Setup, see the Computer Setup (F10) Utility Guide. 56 Appendix B Password Security and Resetting CMOS ENWW