HP Scitex FB550 Scitex FB550 and FB750 Printers- Cleaning Instructions - Page 14
as prompted
View all HP Scitex FB550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4. Wipe ink and debris from the top of the service station using a cloth moistened with head flush. Figure 10 Cleaning the top of the service station 5. Clean both of the wiper rails on both sides of the wiper carriage using a lint-free cloth. Clean the exposed rails on all sides, moving the wiper carriage to clean the full length of the rails. Figure 11 Cleaning rails 6. Close the access door, and press Proceed as prompted by the control panel. Wait for the wiper carriage to move. 7. Open the access door. 8. Apply a dab of grease (supplied) onto a cotton swab. 9. Apply the grease to both rails, making sure to grease the entire surface of the rail (top, bottom and sides). 10. Close the access door. 11. To reset the maintenance counter for this task and complete the procedure, press Proceed as prompted by the control panel. When you press Proceed, the printer resets the maintenance counter and moves the wiper carriage back and forth on the rails to spread the lubricant evenly. 12 User cleaning ENWW