HP Scitex FB550 Scitex FB550 and FB750 Printers- Cleaning Instructions - Page 6

Clean and lubricate rail strips

Get HP Scitex FB550 PDF manuals and user guides View all HP Scitex FB550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

● Minimize the quantity of cleaning liquid used during maintenance to avoid spills, contamination, or harm to printer parts. Carefully moisten cleaning cloths or swabs with the cleaning liquid, and ensure that none of it drips onto the printer. Any excess or residual liquid should be removed by cleaning the area with a dry cloth. Failure to clean off any residual cleaning liquid could cause damage to the printer, or could adversely affect the printer's level of image quality. ● Disposal of waste must be in accordance with applicable regulations. Clean and lubricate rail strips CMYKcm - 40 Hours CMYKW - 20 Hours Ink dust and debris can accumulate on the carriage-wheel strips. These particles become obstacles and friction for the carriage wheels, which can appear as repeating output anomalies on the printed media. NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the beginning of this section must be used. 1. Select from the control panel System> Tools> User Cleaning and Maintenance> 1) Clean and Lube Carriage Rail Strips. 2. Press Proceed to continue. 3. Remove output table and open the output-side door. Opening the output-side door will disable the carriage servo, allowing the carriage to be moved manually. 4. Using a lint-free cloth and isopropyl alcohol, clean the top carriage-wheel strip from end to end on the rail (moving the carriage to clean the full length of the rail). 4 User cleaning ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
●
Minimize the quantity of cleaning liquid used during maintenance to avoid spills, contamination, or
harm to printer parts. Carefully moisten cleaning cloths or swabs with the cleaning liquid, and ensure
that none of it drips onto the printer. Any excess or residual liquid should be removed by cleaning the
area with a dry cloth. Failure to clean off any residual cleaning liquid could cause damage to the printer,
or could adversely affect the printer’s level of image quality.
●
Disposal of waste must be in accordance with applicable regulations.
Clean and lubricate rail strips
CMYKcm
—
40 Hours
CMYKW
—
20 Hours
Ink dust and debris can accumulate on the carriage-wheel strips. These particles become obstacles and
friction for the carriage wheels, which can appear as repeating output anomalies on the printed media.
NOTE:
Users of printers in California must disregard all references to the Printhead Flush or IPA in the
instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the
beginning of this section must be used.
1.
Select from the control panel
System> Tools> User Cleaning and Maintenance> 1) Clean and Lube
Carriage Rail Strips
.
2.
Press
Proceed
to continue.
3.
Remove output table and open the output-side door.
Opening the output-side door will disable the carriage servo, allowing the carriage to be moved
manually.
4.
Using a lint-free cloth and isopropyl alcohol, clean the top carriage-wheel strip from end to end on the
rail (moving the carriage to clean the full length of the rail).
4
User cleaning
ENWW