HP Scitex FB550 Scitex FB550 and FB750 Printers- Cleaning Instructions - Page 4

Schedule of tasks The parts and supplies required for these procedures may be purchased as a kit (HP product number L1Q41-60034). Consistent and proper use of this kit will contribute to optimal printer performance, extend lamp and printhead life, reduce the number of service calls, increase image quality and reduce the potential for output artifacts. Follow the cleaning schedule or clean as needed (depending on frequency of use and amount of dust and airflow around the printer). The printer displays maintenance reminders on the control panel according to this schedule or actual in-service time, as appropriate. A summary of all service intervals is viewable at System> Tools> User Cleaning and Maintenance . To perform these procedures, follow the instructions in this chapter or on the control panel under System> Tools> User Cleaning and Maintenance. Table 1 Schedule of cleaning tasks Task Frequency (hours) CMYKcm CMYKW Required tools Clean and lubricate rail strips on page 4 Clean the carriage encoder strip on page 6 Clean the printheads on page 7 Clean the carriage home sensor on page 9 Clean the service station wiper rails on page 11 Clean service station wiper on page 13 Clean carriage wheels on page 13 Vacuum bottom of carriage on page 16 Replace the UV lamp filters on page 17 Clean the electronics box filters on page 18 40 20 40 20 40 20 80 80 40 80 40 40 80 250 250 Oiled cloth kit 1-2 lint-free cleaning cloths Cleaning fluid One lint-free cleaning cloth Cleaning fluid Three lint-free cleaning cloths One pair of gloves Cleaning fluid Long stick swab Cleaning fluid One grease pack One pair of gloves One cotton swab Cleaning fluid One lint-free cleaning cloth One pair of gloves Cleaning fluid Two long-stick swabs Cleaning fluid N/A Lamp filter kit Vacuum cleaner 2 User cleaning ENWW