HP SignagePlayer mp8000r Maintenance & Service Guide: HP SignagePlayer mp8 - Page 52
Installing the Front Bezel Security Screw
View all HP SignagePlayer mp8000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the bezel. Figure 6-8 Retrieving the Front Bezel Security Screw 8. Replace the front bezel. 9. Install the security screw next to the middle front bezel release tab to secure the front bezel in place. Figure 6-9 Installing the Front Bezel Security Screw 10. Replace the access panel. 11. If the computer was on a stand, replace the stand. 12. Reconnect the power cord and turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. 42 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
7.
Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 6-8
Retrieving the Front Bezel Security Screw
8.
Replace the front bezel.
9.
Install the security screw next to the middle front bezel release tab to secure the front bezel in
place.
Figure 6-9
Installing the Front Bezel Security Screw
10.
Replace the access panel.
11.
If the computer was on a stand, replace the stand.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the access panel was removed.
42
Chapter 6
Removal and Replacement Procedures Small Form Factor (SFF) Chassis