HP SignagePlayer mp8000s Maintenance & Service Guide: HP SignagePlayer mp8 - Page 116
Cable Management, Never crease a SATA data cable.
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Cable Management Always follow good cable management practices when working inside the computer. ● Keep cables away from major heat sources like the heat sink. ● Do not jam cables on top of expansion cards or memory modules. Printed circuit cards like these are not designed to take excessive pressure on them. ● Keep cables clear of sliding or moveable parts to prevent their being cut or crimped when the parts are moved. ● Do not bend any cable sharply. A sharp bend can break the internal wires. ● Never bend a SATA data cable tighter than a 30 mm (1.18 in) radius. ● Never crease a SATA data cable. ● Do not rely on components like the drive cage, power supply, or computer cover to push cables down into the chassis. Always position the cables to lay properly by themselves. Cable Connections System board connectors are color-coded to make it easier to find the proper connection. System Board Connections System Board Connector Connector Name P9 CHFAN1 P11 CHFAN2 P6 SPRK P61 SATA1 P125 HSENSE P151 BOOST P160 N/A P160 N/A Connector Color Maroon Brown White White White Black Black Black Description Front chassis fan Rear chassis fan Internal speaker Optical data Hood sensor ReadyBoost module Optical power Optical power 106 Chapter 7 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis