HP SignagePlayer mp8000s Maintenance & Service Guide: HP SignagePlayer mp8 - Page 30
Computer Setup—Advanced, Table 3-5
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Table 3-5 Computer Setup-Power (continued) Hardware Power Management SATA Power Management enables or disables SATA bus and/or device power management. Default is disabled. S5 Maximum Power Savings-Turns off power to all nonessential hardware when system is off to meet EUP Lot 6 requirement of less than 1 Watt power usage. Default is disabled. Thermal Fan idle mode-This bar graph controls the minimum permitted fan speed. NOTE: This setting only changes the minimum fan speed. The fans are still automatically controlled. Computer Setup-Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3-6 Computer Setup-Advanced (for advanced users) Option Power-On Options Heading Allows you to set: ● POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days). ◦ QuickBoot = Do not clear memory or perform a memory test. ◦ FullBoot = Memory test (count) on cold boot. Clears memory on all boots. 20 Chapter 3 Computer Setup (F10) Utility