HP SignagePlayer mp8000s Maintenance & Service Guide: HP SignagePlayer mp8 - Page 168
USDT Specifications
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Table F-1 Specifications (continued) Power Supply 115V 230V Operating Voltage Range (STD PS) 90-264 VAC 90-264 VAC Operating Voltage Range (EPA 87/89/85% @ 20/50/100% load PS) 90-264 VAC 90-264 VAC Rated Voltage Range (STD PS) 100-240 VAC 100-240 VAC Rated Voltage Range (EPA 87/89/85% @ 20/50/100% load PS) 100-240 VAC 100-240 VAC Rated Line Frequency 50-60 Hz 50-60 Hz Power Output 240W 240W Rated Input Current (maximum)1 STD PS 4A @ 100 VAC 2A @ 230 VAC EPA 87/89/85% @ 20/50/100% load PS 4A @ 100 VAC 2A @ 230 VAC 1 This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European Union. The active power factor corrected power supply also has the added benefit of not requiring an input voltage range select switch. USDT Specifications Table F-2 Specifications Desktop Dimensions (in the desktop position) Height Width Depth 2.60 in 9.90 in 10.00 in 6.6 cm 25.1 cm 25.4 cm (depth will increase if the computer is equipped with a port security bracket) Approximate Weight 6.75 lb 3.07 kg Weight Supported (maximum distributed load in desktop position) 77 lb 35 kg Temperature Range (values subject to change with increasing altitude above sea level) Operating Nonoperating 50° to 95° F -22° to 140° F 10° to 35° C -30° to 60° C NOTE: Operating temperature is derated 1.0° C per 300 m (1,000 ft) to 3,000 m (10,000 ft) above sea level, no direct sustained sunlight. Maximum rate of change is 10° C (50° F)/Hr. The upper limit may be limited by the type and number of options installed. Relative Humidity (noncondensing) Operating (28° C (82.4° F) max wet bulb) Nonoperating (38.7° C (101.66° F) max wet bulb) 10-90% 5-95% 10-90% 5-95% 158 Appendix F Specifications