HP SignagePlayer mp8000s Maintenance & Service Guide: HP SignagePlayer mp8 - Page 71
Removing an External 5.25-inch Drive, CAUTION,
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Removing an External 5.25-inch Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove a 5.25-inch external drive: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 35). 2. If the computer is on a stand, remove the computer from the stand. 3. Remove the access panel (Computer Access Panel on page 43). 4. Rotate the drive cage to its upright position. Figure 6-27 Rotating the Drive Cage Up 5. If removing an optical drive, disconnect the power cable (1) and data cable (2) from the rear of the optical drive. Figure 6-28 Disconnecting the Power and Data Cables Drives 61
Removing an External 5.25-inch Drive
CAUTION:
All removable media should be taken out of a drive before removing the drive from the
computer.
To remove a 5.25-inch external drive:
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
35
).
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the access panel (
Computer Access Panel
on page
43
).
4.
Rotate the drive cage to its upright position.
Figure 6-27
Rotating the Drive Cage Up
5.
If removing an optical drive, disconnect the power cable
(1)
and data cable
(2)
from the rear of
the optical drive.
Figure 6-28
Disconnecting the Power and Data Cables
Drives
61