HP StorageWorks 1606 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 186

10 rmon event rmon event Adds or removes an event in the RMON event table associated to the RMON alarm number. Synopsis rmon event index [description word] [log] [owner name] [trap word] no rmon event index [description word] [log] [owner name] [trap word] Operands index description word log owner name trap word Specifies the RMON event number. The range of valid values is 1-65535. Specifies a description of the event. Generates an RMON log when an event is triggered. Specifies the owner of the event. The maximum number of characters is 32. Specifies the SNMP community or string name to identify this trap. Defaults There are no events configured. Command Global configuration mode Modes Description Use this command to add or remove an event in the RMON event table that is associated with an RMON alarm number. Use the no rmon event command to remove the event configuration. Usage There are no usage guidelines for this command. Guidelines Examples To configure an RMON event: switch(config)#rmon event 2 log description "My Errorstoday" owner gjack See Also show rmon events 168 Converged Enhanced Ethernet Command Reference 53-1001347-01