HP StorageWorks 1606 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 203

qos rcv-queue multicast rate-limit 11 qos rcv-queue multicast rate-limit Configures a cap on the maximum rate for multicast packet expansion. Synopsis qos rcv-queue multicast rate-limit rate [burst burst-size] no qos rcv-queue multicast rate-limit Operands rate burst burst-size Specifies the maximum rate for multicast packet expansion in units of packets per second (pkt/s). This places a cap on the sum of the first level expansion, for example the ingress packets replicated for each egress switch plus the second level expansion, for example packets replicated for egress interfaces on the switch. The range of valid values is 5500-90000000pkt/s. Configures a cap on the maximum burst size for multicast packet expansion, for example packet replication. The burst size represents the maximum number of multicast packet expansion that can be performed back-to-back as a single burst in units of packets (pkt). The range of valid values is 50-65535 pkt. Defaults The default burst size is 4096 packets. The default rate value is 3000000pkt/s. Command Global configuration mode Modes Description Use this command to configures a cap on the maximum rate for multicast packet expansion, for example packet replication. This rate limit is applied uniformly across the entire system. This rate limit is enforced independently by each switch. Use the no qos rcv-queue multicast rate-limit command to return the multicast packet expansion rate limit to the default settings. Usage There are no usage guidelines for this command. Guidelines Examples To lower the maximum multicast packet expansion rate to 10000pkt/s: switch(config)#qos rcv-queue multicast rate-limit 10000 To return the system to the default multicast packet expansion rate limit values: switch(config)#no qos rcv-queue multicast rate-limit See Also qos rcv-queue multicast Converged Enhanced Ethernet Command Reference 185 53-1001347-01