HP StorageWorks 1606 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 225
dot1x timeout server-timeout, Synopsis, Operands, Defaults, Command, Modes, Description, Usage
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
dot1x timeout server-timeout 12 dot1x timeout server-timeout Sets the authentication sever response timeout. Synopsis dot1x timeout server-timeout seconds Operands seconds Specifies the number of seconds that a switch waits for the transmission of packets by the switch to the authentication server. The range of valid values is 1-65535. Defaults The default timeout is 30 seconds. Command Interface configuration mode Modes Description Use this command to set the authentication sever response timeout. Usage There are no usage guidelines for this command. Guidelines Examples To set 40 seconds as the switch-to-authentication server transmission time: switch(config)#interface tengigabitethernet 0/1 switch(config-if)#dot1x timeout server-timeout 40 See Also none Converged Enhanced Ethernet Command Reference 207 53-1001347-01