HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.3.1b release notes (5697-764 - Page 17

Closed defect summary Solution Errlog (raslog) messages not available for diagnosing DHCP problems. Fixed in Fabric OS 5.3.0 Web Tools allows (switch,port) members to be added as member of a zone in interop mode, but this won't actually be created successfully. Fixed in Fabric OS 5.3.0 by blocking addition of D,P members & D,P zoning when in interop mode. Some switches are segmented with reason alias ID overlap when selected switches in fabric configured to use Alias Server due to lack of Alias Server support in Fabric OS 5.2.0. Fixed in Fabric OS 5.3.0 On Solaris, when switch already in marginal state and another marginal event occurs, Events list in Call Home email not getting updated with exact reason for the alert. Fixed in Fabric OS 5.3.0 FCIP error message not correct while editing/adding the subnet mask of an IP address that conflicts with the existing IP addresses. Fixed in Fabric OS 5.3.0 EZManager does not differentiate ports as storage and hosts if no devices/hosts connections made. Fixed in Fabric OS 5.3.0 During stress testing with large number of sent error frames leading to generation of very big core file, and watchdog timer timeout. Fixed in Fabric OS 5.3.0 Enc out counter increases on unused ports on 2Gb platforms after HAreboot or firmware download. Fixed in Fabric OS 5.3.0 Web Tools is not displaying "logged in" Radius account information. Fixed in Fabric OS 5.3.0 Units for temperature, Rx and Tx power are not shown on SFP tab in Web Tools. Fixed in Fabric OS 5.3.0 Web Tools does not display units of Total Bandwidth and Bandwidth Demand in Fabric Topology Window. Fixed in Fabric OS 5.3.0 Web Tools incorrectly returns "Directory change failed" error message rather than "file path provided is not valid" error message when config upload fails due to invalid file path. Fixed in Fabric OS 5.3.0 Modifying port speed and trunking on FC4-48 ports from Web Tools, followed by HAfailover, and then trying to re-launch, Port Admin Fixed in Fabric OS 5.3.0 window on those same ports fails to reload Web Tools window. F_Port route cleanup doesn't happen correctly when NPIV is used on switch in Access Gateway mode. Fixed in Fabric OS 5.3.0 EZSwitch Setup device display is overlapped in Display Connection window when window size not maximized. Fixed in Fabric OS 5.3.0 Portstatsclear help page description of behavior on 2Gb and 4Gb platforms is ambiguous. Fixed in Fabric OS 5.3.0 FR4-18i tracedump files contain many BP error messages and one empty file, potentially leading to incomplete support files. Fixed in Fabric OS 5.3.0 During stress testing when rebooting all core switches in a loop, E_Ports may get stuck in "Mod_Val" mode. Fixed in Fabric OS 5.3.0 Error messages are generated when applying iSCSI easycreate operation from Web Tools on unreachable FC Targets. No error messages if LUN information is not retrievable from an FC Target. Errors are only displayed when applying the operation. Fixed in Fabric OS 5.3.0 If Dynamic Load Sharing (DLS) or In-Order Delivery is disabled, it can't be enabled from Web Tools. However, it can be set/reset via the CLI. Fixed in Fabric OS 5.3.0 HP StorageWorks Fabric OS 5.3.1b release notes 17