HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.3.1b release notes (5697-764 - Page 20

Closed defect summary Solution Host takes a long time to log in when disabled/unused GE-iSCSI ports have IP addresses configured to them. When host does a "SendTargets=All" those IP addresses will be in the list, but will be unreachable. Fixed in Fabric OS 5.3.0 After changing Backbone FID, switchshow does not display LE port information for some EX or VEX ports. Ports function correctly, only the display is incorrect. Fixed in Fabric OS 5.3.0 On FC4-16IP iSCSI Blade, console log for iSNS reports the management port as slot/port 0/0. Fixed in Fabric OS 5.3.0 With multiple FC4-16IP blades in multiple 4/256 directors in the fabric and ISNSC enabled, iSNS error message is logged on only one switch, but should be logged on all switches in the fabric. Fixed in Fabric OS 5.3.0 May not see the targets after successful iSCSI login with FC4-16IP using AIX if immediate data is enabled. Fixed in Fabric OS 5.3.0 LE ports not up after trunk disable/enable as evidenced by EX_Port not coming online. Fixed in Fabric OS 5.3.0 Switchshow shows EX_Port left disabled after it's enabled due to setting VC Credits failure. In addition, when EX_Port trunk master is unplugged, non-trunk master ports are disabled. Fixed in Fabric OS 5.3.0 Execquery Brocade_SwitchFcPortRateStats is not returning correct Instances. When Admin Domain's are created on the switch side without stopping the SMI-A, it always returns Instances with respect to Admin Domain0. Fixed in Fabric OS 5.3.0 Sometimes when trying to add/modify Admin Domain list for multiple user accounts simultaneously, Admin Domain list for user accounts Fixed in Fabric OS 5.3.0 changes. Port detail report shows incorrect values for iSCSI ports with FC4-16IP Blade. Fixed in Fabric OS 5.3.0 swFCPortOpStatus of swFCPortScn is not reported correctly. Fixed in Fabric OS 5.3.0 Excessive logins cause out-of-memory (OOM) panic while switching between user roles and executing Configshow command. Fixed in Fabric OS 5.3.0 Vulnerabilities reported about open SSL VU#386964 & VU#547300. For VU#547300:OpenSSL SSL_get_shared_ciphers() vulnerable to buffer overflow. For VU#386964:OpenSSL SSLv2 client code fails to properly check for NULL. Fixed in Fabric OS 5.3.0 Denial-of-Service condition affecting X.509 certificates verification (NISCC #729618) due to SSL vulnerability in OpenSSL. FOS 5.3.0 includes new version of OpenSSL that resolves this. Fixed in Fabric OS 5.3.0 Incorrect time in Web Tools Switch Health report. Fixed in Fabric OS 5.3.0 Incorrect F_Port behavior when RX side of the cable is disconnected, while the TX side is still inserted. Fixed in Fabric OS 5.3.0 Installation of PKI certificate is delayed on any switch on which installation is attempted due to timing of the startup function. Fixed in Fabric OS 5.3.0 The last character of config uploaded Banner (via "bannerset" CLI command) will disappear when performing a configupload followed by configdownload. Fixed in Fabric OS 5.3.0 When connected to i10k Director in open mode, an RSCN received from the i10k was not immediately forwarded. Fixed in Fabric OS 5.3.0 20