HP StorageWorks 2/32 SAN switch universal rack mount kit installation addendum - Page 13
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit 7. Insert the switch with the attached inner rails into the outer rails. Note: This step applies to both the HP System/e rack and the HP 9000 Series or comparable EIA rack. Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 9 and Figure 10. HP StorageWorks SAN Switch 2/8|16|32 Installation Guide 11 Addendum Pg
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
11
Addendum Pg
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
7.
Insert the switch with the attached inner rails into the outer rails.
Note:
This step applies to both the HP System/e rack and the HP 9000 Series or
comparable EIA rack.
Figure 9:
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side.
See
Figure 9
and
Figure 10
.