HP StorageWorks 2/32 SAN switch universal rack mount kit installation addendum - Page 14

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

12

Addendum Pg

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Figure 10:

Installing the switch into a rack (HP System/e rack)

8.

Tighten the nuts installed in

step a

of step 4 on page 5. See

Figure 4

.

Note:

To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head

screw with captive star lock washer from either side of the rack uprights.

9.

Continue the installation by returning to one of the following guides as

appropriate.

a.

“Connecting AC Power” on page 45 in the

HP StorageWorks SAN Switch

2/32 Installation Guide, Version 4.0.x.

b.

“Connecting AC Power” on page 45 in the

HP StorageWorks SAN Switch

2/16 Installation Guide, Version 3.0.x.

c.

Connecting the power cord in step 8 on page 45 in the

HP StorageWorks

SAN Switch 2/8 Installation Guide, Version 3.0.x.

Section	Page
Pen-and-ink Changes	2
Page Additions	2
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit	3
Figure 1: SAN Switch 2/16 rack-mounted switch	3
Figure 2: Installing the rear mounting brackets (HP 9000 Series or comparable EIA rack)	5
Figure 3: Installing the rear mounting brackets (HP System/e rack-left rear upright)	6
Figure 4: Installing the outer rails (HP 9000 Series or comparable EIA rack)	7
Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack)	8
Figure 6: Assembling the outer rails (HP System/e rack)	9
Table 1: Number of screws required to assemble the inner rails	9
Figure 7: Assembling the inner rails	11
Figure 8: Assembling the inner rails on a SAN Switch 2/8 with plenum	12
Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)	13

HP StorageWorks 2/32 SAN switch universal rack mount kit installation addendum - Page 14

SAN Switch 2/8 Installation Guide, Version 3.0.x., 16 Installation Guide

Page 14 highlights