HP StorageWorks 2/32 SAN switch universal rack mount kit installation addendum - Page 8
Assembling the outer rails (HP 9000 Series or comparable EIA rack)
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit b. Depending on the rack you are using, complete one of the following tasks: - For an HP 9000 Series or comparable EIA rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 5. Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack) 6 Addendum Pg HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
6
Addendum Pg
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
b.
Depending on the rack you are using, complete one of the following tasks:
—
For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Figure 5
.
Figure 5:
Assembling the outer rails (HP 9000 Series or comparable EIA rack)