HP Surestore 64 HP Surestore Director FC-64 SNMP Support Manual
HP Surestore 64 - Director Switch Manual
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Surestore 64 manual content summary:
- HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 1
- HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 2
- HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 3
hp surestore director fc-64 SNMP Support Manual Edition E0102 Order No. A6534-90908 Printed in U.S.A. - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 4
Notice Safety Instructions Warranty ii Format Conventions WARNING Caution Note this font - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 5
Contents 1 Introduction to SNMP CONTENTS 2 Director SNMP support 1 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 6
Contents 2 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 7
Introduction to SNMP 1 INTRODUCTION TO SNMP Overview How SNMP Works Variables In a Managed Device MIBs and Traps 1 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 8
Overview Any protocol for managing networks must allow virtually all network devices and systems to communicate statistics and status information to network management stations, (network managers). This communication must be independent of the primary network transmission medium and impose little - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 9
Introduction to SNMP How SNMP Works SNMP is the only protocol that is widely available from many vendors of TCP/IP networks and internetworks. SNMP: Allows management with a simple set of commands. Allows new devices added to a network to be easily managed with minimal intervention. Is adequate for - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 10
NMS GetRequest PDU GetResponse PDU Get Values SetRequest PDU GetResponse PDU Set Values Switch NMS GetNextRequest PDU GetResponse PDU Get Next Values Switch Trap PDU Send Trap 4 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 11
MIBs, available with SNMP, provide standard definitions for the variables within the managed object that are used for network monitoring and management. When a managed object supports a standard MIB, it agrees to provide and make available the applicable variables listed in the standard MIB. 5 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 12
NMS Read status information with GetRequest command or Set a variable to a value with SetRequest command Agent (Use MIB to identify variable) Managed Device MIB Variable a Variable b Variable c Variable d Variable e Variable f Variable g - Actual Variable (object) (x)y (x)y (x)y (x)y (x)y 6 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 13
by the standard MIBs. Chapter 2 describes the private enterprise MIBs in detail. The private enterprise MIB supported by the HP Surestore Director FC-64 is: ef6000 MIB Traps are unsolicited status reports, or status change indicators a managed object sends to a network manager. To send traps - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 14
SNMP encourages use of the second type of trap to reduce the load on a network. Both types of trap provide the information to the manager, but the second type allows the manager to wait until higher priority tasks are accomplished and poll for additional information in its own time. 8 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 15
2 DIRECTOR SNMP SUPPORT SNMP Management SNMP Support SNMPv1 Transports MIB-II Support Fibre Channel Management MIB Fibre Channel Fabric Element MIB Support EF-6000 Private Enterprise MIB (ef-6000) Director SNMP support 9 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 16
be made available over other protocols. A MIB is a hierarchical tree of groups and variables. Operators at a network management station enter a command with supported groups and variables from the MIB. Each group is a "branch" and each variable is a "leaf" within the MIB tree. The tree begins with - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 17
groups under internet are mgmt, experimental, and private (refer to Figure 4). For mgmt, see MIB-II Support on page 17; for experimental refer to Fibre Channel Fabric Element MIB Support on page 31; and for private, refer to the EF-6000 Private Enterprise MIB (ef-6000) on page 41. Director - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 18
internet (1) mgmt (2) experimental (3) private (4) Figure 4 MIB - II Fabric Element MIB ED-5000 MIB Use the following SNMP commands with the MIB variables: • get Retrieves the value of variables at the agent. • set Sets the value of variables at the agent. • trap Notifies the management - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 19
in the standard MIB-II definition, the Fibre Channel Fabric Element MIB, and director Private Enterprise MIB. All groups and variables in the supported MIBs are read only by SNMP management stations unless noted otherwise. • Enables the director to send unsolicited trap messages to the network - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 20
Note 14 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 21
through the director Product Manager. This transport provides immediate "plug-and-play" support for the director. In the Product Manager for the director, use the Configure enterprise MIB. Download the MIBs for SNMP management stations from the HP EFC Server's Web page. 15 Director SNMP support - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 22
The uniform resource locator (URL) for the Web page depends on the HP EFC Server's host name on your network. To access MIB-II and Fabric Element variables, download the Fibre Channel Fabric Element MIB. 16 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 23
in MIB-II: • System group The variable ID is: {iso, org, dod, internet, mgmt, mib-2, system} • Interface group The interface group supports three interfaces: software loopback driver, Ethernet driver, and Fibre Channel IP driver. The variable ID is: {iso, org, dod, internet, mgmt, mib-2, interface - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 24
• IP group The variable ID is: {iso, org, dod, internet, mgmt, mib-2, ip} • ICMP group The variable ID is: {iso, org, dod, internet, mgmt, mib-2, icmp} • TCP group The variable ID is: {iso, org, dod, internet, mgmt, mib-2, tcp} • UDP group The variable ID is: {iso, org, dod, internet, mgmt, mib-2, - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 25
2-1 Scalar FCMGMT Objects Object revisionNumber Provides A constant Display String value representing the revision number of the FCMGMT MIB that is supported by the HP EFC Server SNMP agent is returned. The following sections define the FCMGMT MIB objects and how they are instrumented in the - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 26
whenever the status or state of any director managed by the HP EFC Server changes. Use of this object was deprecated in the 2.0 version of the MIB. ConfigurationChangeTime (deprecated) connUnitTableChangeTime (deprecated) Not supported. Use of this object was deprecated in the 2.0 version of the - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 27
link between the HP EFC Server and the link between the HP EFC Server and the The total time the link between the HP EFC Server and the switch or director the HP EFC Manager. If it was HP EFC Manager Version 1.1 or higher is installed on the PC, accessing this URL from a browser will start the HP - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 28
principal switch in the fabric otherwise no(2) is returned. 3 is always returned. The total time since the last status change on this switch. Not supported. 1 is always returned. 0 is always returned. Not applicable to director; an array of 16 zeros is returned. On a read (Get) the configured name - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 29
director associated with this entry. This table is indexed by this object and the ConnUnitRevsIndex object. 1 is always returned. Each director supports only one revision component. The revision of the switch firmware. Switch firmware is returned. The sensor table contains information on the status - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 30
is based upon the director FRU status. The active, backup and update-busy states are mapped to ok(3). And the will be one of the following: f_port(8), e_port(9), or g_port(10). The value returned is a bit map of the FC class capabilities of the port. For f_port types a constant of 12 (class_two(4) - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 31
(class_f(1) | class_2(4) | class_3(8)) is returned. This is mapped from the port status reported by HP EFCM. For uninstalled ports unknown(1) is returned. If the port is blocked offline(3) is returned. All Empty string is returned. Not applicable. Empty string is returned. Director SNMP support 25 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 32
object. A unique integer value that identifies a particular event on a particular director. Event index values wrap (get reused) at 2,147,483,647. Not supported. This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS DD = day number, MM = month number, YYYY - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 33
on a particular director. Index values are assigned as links become known to the HP EFC SNMP agent. Index values are reset at HP EFC SNMP agent initialization time. The WWN of the local connUnit is returned. This on this link. This information is available for E ports only. Director SNMP support 27 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 34
port on this link. This information is available for F ports only. Not supported Not supported Not supported If the port is an E_Port, switch (4) is returned. Otherwise, unknown (1) is returned. For F_Ports, the 24-bit Fibre Channel address is returned. For E_Ports, the domain ID of the attached - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 35
group allows for the control of trap generation on the HP EFC Server SNMP agent. The group consists of two scalar On read operations rowInactive(2) or rowActive(3) is returned. Write operations are supported. RowDestroy(1) causes the trap recipient to be removed from the table. RowInactive - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 36
a particular director. Both the connUnitState and connUnitStatus objects are included as trap data. This trap is generated when a director is removed from the HP EFC Server. The connUnitId of the deleted director is included as trap data. This trap is generated when an event is logged in a director - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 37
management information base (MIB) enables users on network management stations to monitor, control, and configure the director remotely using functions specifically for the director. The HP Surestore Director FC-64 supports version 1.10 of the FCFE MIB. There are five groups of variables defined and - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 38
• Capability (FcFeCap) The following sections define the FCFE MIB variables and their output. All variables in the FCFE MIB except for fcFxPortPhysAdminStatus, which is defined under fcFxPortPhysTable in fcFeOp group, are read-only. Error Group Table This Fcfporterrrortable displays the number of - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 39
, including frame delimiters, delivered through the F_Port to its attached N_Port. Discards BusyFrames RejectFrames Frames discarded by this F_Port.(not supported). F_BSY frames generated by the F_Port against class 2 frames. F_RJT frames generated by the F_Port against class 2 frames. Accounting - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 40
Variable InOctets OutOctets Discards Table 2-15 Accounting: Class 3 (cont'd) Provides the Number of Class 3: Frame octets, including frame delimiters, received by the F_Port from its attached N_Port. Frame octets, including frame delimiters, delivered through the F_Port to its attached N_Port. - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 41
to detect loss of synchronization. Operation: Fabric Login Table The Fcflogintable displays the service parameters for each F_Port in the fabric element that have been established from the most index. fcFxlogiFxPortIndex Port index. fcFxlogiNxPortIndex Node port index. Director SNMP support 35 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 42
that the attached N_Port has requested the F_Port for the support of classes of services and the F_Port granted the request. It's a bit map of classes of services. Flag indicating the attached N_Port has requested the F_Port for the support of intermix and the F_Port has granted the request. This - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 43
the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFPortCapacity inclusive. The name identifier of the module. Director SNMP support 37 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 44
is used as the timeout value for detecting an error condition. Value indicating the set of classes of service supported by the F_Port. Flag indicating if the F_Port supports an intermixed dedicated connection. The flag is always at no(2). StackedConMode Value indicating the mode of stacked connect - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 45
is capable of receiving from its attached N_Port. Cos Value indicating the set of classes of service the F_Port is capable of supporting. Intermix Flag indicating if the F_Port is capable of supporting the intermixing of class 2 and class 3 frames during a class 1 connection. This flag is only - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 46
time (in microseconds) the F_Port is capable of supporting. (Not supported.) Minimum holding time (in microseconds) the F_Port is capable of supporting. (Not supported.) Value indicating the set of baud rates the F_Port is capable of supporting. Value indicating the set of media the F_Port is - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 47
EF-6000 Private Enterprise MIB (ef-6000) Director SNMP support private (4) enterprise (1) McDATA (289) commDev (2) fibrechannel (1) fcSwitch (1) ef-6000 (2) ef-6000Sys (1) Figure 7 ef-6000Fru (2) ef-6000Port (3) ef-6000 PortBinding (4) ef-6000Zoning (5) ef-6000 ThresholdAlerts (6) 41 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 48
Six groups of MIB are defined and supported in the EF-6000 Private Enterprise MIB: • System group (ef6000Sys) • Field replaceable unit (FRU) group (ef6000Fru) • Fibre Channel port group (ef6000Port) • Port Binding group (ef6000PortBinding) • - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 49
Gig. Position of the module. Operational status of the module. The active(1) state indicates that the current module is active. The backup(2) state indicates that the backup module is used. The update-busy (3) state indicates that the module is in the updating process. The failed(4) state indicates - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 50
as follow: unknown(1), lc(2), mt-rj(3), mu(4) A bit map to represent distance types of the Port. bit 0 unknown, bit 1-3 reserved, bit 4 long distance (l), bit 5 intermediate distance (i), bit 6 short distance (s), bit 7 very long distance. Supported transceiver types of the port. The values are - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 51
bit 0 single mode(sm), bit 1 reserved, bit 2 multimode 50m (m5), bit 3 multimode 62.5 (m6), bit 4-7 reserved. A bit map to represent transmission speed of the port. bit 0 100 Mbytes/Sec, bit 1 reserved, bit 2 200 Mbytes/Sec, bit 3 reserved, bit 4, 400 Mbytes/Sec, bit .) Director SNMP support 45 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 52
Table 2-24 Fibre Channel Port Group Table Variables (cont'd) Variable ef6000PortRxC2Words ef6000PortTxC2Frames ef6000PortRxC2Frames ef6000PortTxC2Octets ef6000PortRxC2Octets ef6000PortTxC3Words ef6000PortRxC3Words ef6000PortTxC3Frames ef6000PortRxC3Frames ef6000PortTxC3Octets ef6000PortRxC3Octets - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 53
port number on the director. It ranges from 1 to the number of physical ports that can be supported by the director. The flag indicates whether or not Port Binding is in effect for an individual; port zone set name. The count of zones included in the active zone set. Director SNMP support 47 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 54
Table 2-26 Zoning Group Table (cont'd) Variable ef6000DefaultZoneSetState ef6000ActiveZoneSetState ef6000HardwareEnforcedZoning Provides: The state of the default zone set. The state of the default zone set. Indicates if zoning is hardware enforced (1=Hardzoning, 0=Nameserver zoning only). Table - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 55
(only valid when the threshold alert port type = list). The left-most bit represents port 0. The number of minutes in a threshold alert interval. If the counter or counter set to be monitored. This object is not supported in the current release. Generic Traps The following generic traps can be - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 56
• warmStart Reports that the agent is reinitializing due to an IML or IPL. • authenticationFailure An indication that the agent has received an improperly authenticated protocol message. By default, this trap is disabled but may be enabled using the Product Manager. Enterprise Specific Trap The - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 57
INDEX A C T D V E F G M S Index 1 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 58
Index 2 - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 59
help us improve our publications. Remove this page and mail or FAX it to 916-785-1679. Use and attach additional pages if necessary. The manual is well organized. The information is technically accurate. Information is easy to find. Step-by-step procedures are easy to perform. There are enough - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 60
Fold Here Tape Please Do Not Staple Tape - HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 61
- HP Surestore 64 | HP Surestore Director FC-64 SNMP Support Manual - Page 62
KS±VXUHVWRUH±GLUHFWRU±IF²³´
6103±6XSSRUW±
0DQXDO