HP Surestore 64 HP Surestore Director FC-64 SNMP Support Manual - Page 30

Table 2-5 Sensor Table (cont'd) Object connUnitSensorName connUnitSensorStatus Provides The module name of the FRU, "FAN" or "PWR" The status indicated by the sensor. The values are defined as follows: unknown(1), other(2), ok(3), warning(4), failed(5). connUnitSensorInfo connUnitSensorMessage connUnitSensorType connUnitSensorCharacteristic The value returned is based upon the director FRU status. The active, backup and update-busy states are mapped to ok(3). And the failed state is mapped to failed(5). The serial number of the FRU is returned. No value is returned if the module is failed. The textual description of the FRU status. Either fan(4) or power-supply(5) is returned. The value, other(2), is always returned. The port table contains information on the physical ports on a given director. Table 2-6 Port Table Object *connUnitPortUnitId *connUnitPortIndex connUnitPortType connUnitPortFCClassCap Provides The connUnitId of the director associated with this entry. This table is indexed by this object and the connUnitPortIndex object. The fixed physical port number +1. The index values range from 1 to 32. The value returned will be one of the following: f_port(8), e_port(9), or g_port(10). The value returned is a bit map of the FC class capabilities of the port. For f_port types a constant of 12 (class_two(4) | class_three(8) is returned. For e_port and g_port types 13 is returned (class_f(1) | class_2(4) | class_3(8)) is returned. 24